Brinkmann Extraction Fans

Brinkmann Extraction Fans

Brinkmann is a name well known throughout the industry for its reliable centrifugal fans. This range is has been designed for duct mounting and offers excellence in the removal of toxic and corrosive gases or contaminated air. Brinkmann extraction fans are New Zealand made.

Each model offers the same design and construction but in various sizes. There are five models available:

  • DD160mm
  • DD200mm
  • DD250mm
  • DD315mm
  • DD400mm

Model selection, as advised by TPE, will depend on the required air volume and pressure loss associated with the size and type of fume cupboard, hood, other extraction equipment, including ducting and bends.

These models are easy to maintain, have a low noise level. A drainage point deals with any moisture accumulation within the fan. The 36-blade rotor is statically and dynamically balanced, and only weigh half of what their steel equivalents do, resulting in better acceleration and lower operating torque.

Contact TPE to discuss your options when it comes to the range of Brinkmann extraction fans on offer.

Brinkmann Extraction Fans
Download our Spec Sheet

Here are two of the five sizes we offer in Brinkmann Extraction Fans

DD160 Extraction Fan

Construction

Fan Housing:
Moulded in PVC or Polypropylene and includes a drainage point for moisture build-up. (Discharge point adjustable).

Impeller/Rotor:
One piece 36 blade polypropylene rotor, complete with labyrinth seal, coverplate, and is statically and dynamically balanced. The injection moulding process used produces a optimum disc and blade resulting in high performance with extremely low noise levels.

Electric Motor:
Powered by three / or single phase motor. The motor rating is matched to airflow requirement.

Wiring:
Wiring of power source and commissioning prior to delivery. (Note: Wiring diagrams are available). Fan supplied with a fitted, inbuilt isolation switch.

Stand:
Housing and motor are mounted on a galvanised steel frame with anti-vibration mounts.

Net Fan Weight:
DD160: 20Kg.

DD160 Extraction Fan

DD315 Extraction Fan

Construction

Fan Housing:
Moulded in PVC or Polypropylene and includes a drainage point for moisture build-up. (Discharge point adjustable).

Impeller/Rotor:
One piece 36 blade polypropylene rotor, complete with labyrinth seal, coverplate, and is statically and dynamically balanced. The injection moulding process used produces an optimum disc and blade resulting in high performance with extremely low noise levels.

Electric Motor:
Powered by three / or single phase motor. The motor rating is matched to airflow requirement.

Wiring:
Wiring of power source and commissioning prior to delivery. (Note: Wiring diagrams are available). Fan supplied with a fitted, inbuilt isolation switch.

Stand:
Housing and motor are mounted on a galvanised steel frame with anti-vibration mounts.

Net Fan Weight:
DD315: 45Kg.

DD400 Extraction Fan

Download the product booklet above or contact us now to find out more about the Brinkmann Extraction Fans and their use in your lab.